Sitemap

STABILIZATION/SOLIDIFICATION AGENTS
Sorbond®/Liqui-Sorb®
GENERAL OVERVIEW

The U.S. Environmental Protection Agency passed the Resource Conservation and Recovery Act (RCRA) in 1984. This ruling established two criteria for disposal of solid waste into industrial landfills:

  1. Paint Filter Liquids Test (PFT): A standard to determine the presence of free liquids in bulk or containerized waste.

  2. Toxicity Characteristic Leach Procedure (TCLP): A standard to determine the compressive strength and release of heavy metals from bulk or containerized waste.

Wastes to be disposed of in industrial landfills must first pass PFT to assure there is no presence of free standing liquids. If these solids contain heavy metals, they then may be required to pass limits imposed by TCLP . This is a procedure designed to simulate landfill conditions, where solids are subjected to high compressive strengths and low pH conditions from the decomposition of organic matter. The TCLP assures that these solids will not re-release heavy metals in the form of leachate. CETCO offers 2 types of products for the stabilization and solidification of sludge and semi-solids generated from dredging, remediation operations and general industrial applications

  • Sorbond® Clay based absorbents containing proprietary inorganic minerals

  • Liqui-Sorb® Granular Superabsorbent Medias

Solidification & Stabilization Agents

Product Product Use

Typical Absorption Ratio 
Absorbent: Water

Sorbond® UP General solidification (powder formula) Up to 1:9 by weight
Sorbond® UG General solidification (granular formula)
aqueous matter containing hydrocarbons and other organics
Up to 1:9 by weight
Sorbond® LPCII Heavy metal solidification/stabilization Up to 1:4 by weight
 Sorbond® LOC Heavy metal and organic solidification/stabilization Dependent on organics present
Liqui-Sorb® 200 Highly efficient product for solidifying aqueous matter Up to 1:250 by weight
Liqui-Sorb® 1000 Highly efficient product for solidification/stabilization of aqueous matter containing hydrocarbons and other organics Dependent on organics present

See product tech data sheets for further information regarding each product

 

 

Copyright 2007 CETCO Remediation Technologies.
All rights reserved. CETCO is a wholly owned subsidiary of AMCOL International Corp.
1500 W. Shure Dr., Arlington Heights, Illinois 60004 USA / +1 800.527.9948 / tel +1 847.392.5800 / fax +1 847.577.5571 
Legal Terms and Conditions of Use | Privacy Policy | Disclaimer