Sitemap

STABILIZATION / SOLIDIFICATION AGENTS Sorbond® and Liqui-Sorb®
FEATURES and BENEFITS

SORBOND® UP/UG
Up to 25% more efficient than DE, fly ash, and other traditional absorbing agents.

  • Effective on variety of waste streams with pH 2-12.

  • Non-biodegradable.

  • Non-exothermic.

  • Enhances de-watering of solids and helps treated solids pass Paint Filter Test (EPA 9095).

  • Available in powder (UP) and granular (UG) form.

  • Minimal humidity effects.

SORBOND® LPC II
Chemically fixates heavy metal-bearing wastes, while minimizing total volume of the resulting solids.

  • Helps treated solids pass Paint Filter Test (EPA 9095) and Liquid Release Test (9096).

  • Helps solids pass Toxicity Characteristic Leachate Procedure (EPA Method 3015).

  • Require mixing - sets up in 24—72 hours.

  • Offers high compressive strengths for solidified matter.

  • Low exothermic reaction during treatment.

SORBOND® LOC
Chemically fixates heavy metal bearing wastes, stabilizes hydrocarbons and other organic and inorganic material while minimizing total solids volume.

  • Helps treated solids pass Paint Filter Test (EPA 9095) and Liquid Release Test (9096).

  • Helps solids pass Toxicity Characteristic Leachate Procedure (EPA Method 3015).

  • Require mixing - sets up in 24—72 hours.

  • Offers high compressive strengths for solidified matter.

  • Low exothermic reaction during treatment.

LIQUI-SORB® 200
Highly efficient media for stabilization of aqueous matter.

  • Capable of absorbing up to 250x weight in water.

  • Less than 1% free swell.

  • Non-biodegradable.

  • Non-exothermic.

  • Helps treated solids pass Paint Filter Test (EPA 9095) and Liquid Release Test (9096).

  • Requires no mixing – sets up in less than 2 minutes.

  • Certified incinerable material with heat value of 5560 BTU/lb.

  • Strong ion exchange capability allows for some heavy metals to be bound to wastes.

LIQUI-SORB® 1000
Highly efficient media for stabilization of aqueous matter containing hydrocarbons.

  • Non-biodegradable.

  • Non-exothermic.

  • Helps treated solids pass Paint Filter Test (EPA 9095) and Liquid Release Test (9096).

  • Requires mixing – sets up in less than 2 hours.

  • Strong ion exchange capability allows for some heavy metals to be bound to wastes.

 
 

Copyright 2007 CETCO Remediation Technologies.
All rights reserved. CETCO is a wholly owned subsidiary of AMCOL International Corp.
1500 W. Shure Dr., Arlington Heights, Illinois 60004 USA / +1 800.527.9948 / tel +1 847.392.5800 / fax +1 847.577.5571 
Legal Terms and Conditions of Use | Privacy Policy | Disclaimer